Black Box MPSH16-D20-120V User Manual

 

2.  Quick Start Guide

This Quick Start Guide describes a simplified installation procedure for the Outlet 

Managed PDU hardware, which will allow you to communicate with the unit in 

order to demonstrate basic features and check for proper operation.

Note that this Quick Start Guide does not provide a detailed description of unit 

configuration, or discuss advanced operating features in detail.  In order to take full 

advantage of the features provided by this unit, it is recommended to refer to the 

remainder of this User’s Guide.

2.1. 

Installing the Outlet Managed PDU Hardware

2.1.1.  Apply Power to the Outlet Managed PDU
Refer to power rating nameplate on the Outlet Managed PDU, and then connect the 

unit to an appropriate power source.  Note that some Outlet Managed PDU models 

feature two separate AC inputs and two separate power branches, while others 

feature a single power inlet.  Connect power cable(s) to the unit’s Circuit "A" and 

Circuit "B" Power Inlets (if present), install the cable keeper(s) (as described in 

Section 4.1.1), then connect the cables to an appropriate power supply.  Refer to the 

table in the Specifications section for information concerning power requirements 

and maximum load.

Note: