Ariens 924128 ST1332LE User Manual

GB - 16

Differential Lock knob is located 
on the Left Wheel Hub. With 
differential locked power is 
applied equally to both wheels.
To engage differential lock:

• Pull and turn knob to LOCKED 
(1) position and release (knob 
will snap in place when 
positioned correctly).
To resume differential action for 
transport:

• Pull and turn knob to UNLOCKED (2) 

position and release.

Axle Lock Pin (Figure 13) (924125, 128, 
338)

Use the axle lock pin to lock or unlock the right 
wheel. Lock the right wheel to increase 
traction; unlock the right wheel to allow for 
easier turning of the unit.

The scraper blade allows the back of the 
housing to keep better contact with the surface 
being cleared. It also prevents damage to the 
housing from normal wear.

IMPORTANT: DO NOT allow Scraper Blade to 
wear too far or Auger/Impeller housing will 
become damaged.

The runners control the distance between the 
scraper blade and the ground. Adjust runners 
equally to keep blade level with the ground. 
Refer to Pre-Start for recommended settings.

Drift Cutters (Figure 14)

Drift cutters break up snow drifts that are taller 
than the auger housing and direct the snow 
into the auger. Store the drift cutters on the 
auger housing when not in use. Install them as 
shown below so they are taller than the snow 
to be cleared.

1

2

OL2730

Figure 13

Axle 

Lock 

Pin

1. Stored Position
2. Operating Position

Figure 14