Fluke PM6685R User Manual

9-68 Command Reference

:MEASure [:VOLT] :PTPeak?

PM6680B PM6681

[8 (@«1|2»)].

Peak-to-Peak Voltage

This command make measures the peak-to-peak voltage with the input DC cou-

pled.

Parameters:

(@«1|2») is the channel to measure on

(@1) means input A

(@2) means input B

Complies to standards:

SCPI 1991.0, confirmed.

:MEASure :RISE :TIME?

PM6680B PM6681

[8 [<lower threshold> [,<upper threshold>[,<expected value>[,<resolution>]]]] [,(@1)]

Rise-time

The transition time from 10% to 90% of the signal amplitude is measured.The

measurement is always a single measurement and the Auto-trigger is always on,

setting the trigger levels to 10% and 90 % of the amplitude. If you need an aver-

age transition time measurement or other trigger levels, use the :SENSe subsys-

tem and manually set trigger levels instead.

Parameters:

<lower threshold>, <upper threshold>, <expected value> and <resolution are all ignored by

the counter

<(@1)> is the channel to measure on, i.e., input A

Complies to standards:

SCPI 1991.0, confirmed.