Honeywell hw400 User Manual

ENGINE AND ALTERNATOR

9-2

www.honeywellgenerators.com

Honeywell Portable Electrical Generator Service Manual

9.2 ENGINE AND ALTERNATOR

A—END COVER

4 N•m (3 lb. ft.)

B—ROTOR BOLT

Use oil before replacing the rotor bolt.

C—ALTERNATOR HOUSING BOLTS

48 N•m (35 lb. ft.)

D—REAR BEARING CARRIER

AND STATOR

See CARBURETOR, page 9-7.

E—ROTOR

See ROTOR, page 9-5.

F—ENGINE

Contact an authorized service dealer
for engine maintenance and repairs.

Cylinder Head Bolts - 48 N•m (35 lb. ft.)

G—VIBRATION ISOLATORS

Insert tabs into holes.

Check rubber is not chipped,
hardened, or worn.

Refer to illustration for proper
positioning.

NOTE: On some models there are only
4 vibration isolators instead of 6.

H—FRAME

See WHEEL, LEG, & HANDLE
ASSEMBLY, page 9-11.

I— CRANKCASE COVER

28 N•m (21 lb. ft.)