Revolabs 01-hdvenu User Manual

Page of 26
 
- 19 - 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1.  Audio Out port 
— accepts the 2.5mm plug for the earpiece. 
2.  Charging Port 
— docks to all Revolabs HD Charger Bases. 
3.  Mute button 
— press to mute, un-mute and pair microphone. 
4.  LED display 
— visual status for mute, un-mute, and pairing. 
5.  TA4F connector 
— connects to Countryman microphone cable. 
 
To use the HD Wireless Adapter for Countryman Microphone: 
 
4.  Remove the Microphone Adapter from the Charger Base.  
 
The adapter turns on and mutes automatically when removed from Charger Base (flashing RED 
LED). The Microphone Adapter is attached to a Countryman Microphone with the specific cable 
designed for Revolabs.  The HD Wireless Adapter for Countryman microphone supplies the 
necessary phantom power specifically for the Countryman microphone.   
5.  To turn the Adapter off, return the microphone unit to the Charger Base or press and hold the 
Mute button for ~10 seconds until the LED turns solid RED then release button. 
Important: Always remove the microphone from the Adapter and separate the parts before 
returning the Adapter to the Charger Base.
 
If the Adapter is moved too far from the Base Station (~300 feet or 90 meters) the connection will be 
dropped (LED flashes all colors) and the audio will mute. After 15 seconds the microphone will beep 
5 times, and will continue beeping every 30 seconds to indicate that it is out of range.  
Move the Countryman Adapter closer to the Base Station and the connection will automatically be re-
established  to  its  original  state,  and  the  beeping  will  cease.  If  not,  the  Countryman  Adapter  will 
continue beeping until it turns off in about 15 minutes. 
 
Pairing Wireless Microphones to Base Station  
 
Pairing  creates  a  link  between  the  HD  Wireless  Microphone  and  the  Base  Station,  with  a  unique 
electronic  serial  number. When  the  microphone  and  Base  Station  have  been  previously  paired,  the 
mic will automatically try to connect to the same Base Station whenever it is lifted from the Charger 
Base.