Sony UWP-X1/X2 User Manual
13
Transmission
channel
channel
Transmission
frequency
frequency
Attenuation
level of the
input signal
level of the
input signal
Accumulated
battery use
time
battery use
time
Press
the
SET
button.
the
SET
button.
Parts Identification
Body-pack transmitter
(UTX-B1)
(UTX-B1)
1
Antenna
2
Audio input connector
Connect the supplied lavalier
microphone here.
microphone here.
3
Power indicator
Lights up red when the transmitter is
tuned on.
tuned on.
4
Display section
A
AF (audio frequency) indication
Appears whenever the input audio
signal is stronger than the reference
level.
signal is stronger than the reference
level.
B
RF (antenna output) indication
Appears during signal transmission
from the antenna.
from the antenna.
C
RF (antenna output) level
indication
Shows the RF output level setting.
For details, see “Setting the RF output
level” on page 32.
Shows the RF output level setting.
For details, see “Setting the RF output
level” on page 32.
D
BATT (battery) indication
Shows the battery condition.
For details, see “Power Supply” on
page 20.
For details, see “Power Supply” on
page 20.
E
CH (channel) indication
Shows the transmission channel. Each
time you press the SET button in
transmission mode, the channel
indication changes as follows.
For details, see “Settings” on page
28.
time you press the SET button in
transmission mode, the channel
indication changes as follows.
For details, see “Settings” on page
28.
A
B
D
E
AF
RF
CH
BATT
C
H
L