Sony UWP-X1/X2 User Manual
Parts Identification
14
5
+ (+ selection) / – (– selection/
reset) buttons
Press these buttons to set the
transmission channel, frequency, or
attenuation level of the input signal.
The “–” button resets the accumulated
battery use time to “00:00”.
Press these buttons to set the
transmission channel, frequency, or
attenuation level of the input signal.
The “–” button resets the accumulated
battery use time to “00:00”.
6
Battery compartment
Accommodates two LR6 (size AA)
alkaline batteries.
For details on how to insert the
batteries, see “Power Supply” on
page 20.
alkaline batteries.
For details on how to insert the
batteries, see “Power Supply” on
page 20.
7
SET button
Press to change and enter display
parameters.
For details, see “Settings” on page
28.
parameters.
For details, see “Settings” on page
28.
8
POWER switch
Turns the power of the transmitter ON
or OFF.
or OFF.
Hand-held microphone
(UTX-H1)
(UTX-H1)
1
Power indicator
Lights up red when the microphone is
turned on.
turned on.
2
POWER switch
Turns the power of the microphone
ON or OFF.
ON or OFF.
3
Battery compartment
Accommodates two LR6 (size AA)
alkaline batteries.
For details on how to insert the
batteries, see “Power Supply” on
page 20.
alkaline batteries.
For details on how to insert the
batteries, see “Power Supply” on
page 20.
4
Display section
A
AF (audio frequency) indication
Appears whenever the input audio
signal is stronger than the reference
level.
signal is stronger than the reference
level.
B
RF (antenna output) indication
Appears during signal transmission
from the antenna.
from the antenna.
C
RF (antenna output) level
indication
Shows the RF output level setting.
For details, see “Setting the RF output
level” on page 32.
Shows the RF output level setting.
For details, see “Setting the RF output
level” on page 32.
A
B
D
E
C
H
L
The rear
side of the
battery
compartment
side of the
battery
compartment