Sony V6 User Manual
30
Parts Identification
Plug-on transmitter (UTX-
P1)
P1)
a Audio input connector (XLR type)
Connect a microphone or a line output
connector of an audio mixer, etc.
Connect a microphone or a line output
connector of an audio mixer, etc.
b AF/PEAK (audio frequency/peak
level) indicator
Turns on or off according to the audio input
level as follows.
level as follows.
c INPUT (input signal) selector
Set this selector to MIC when a microphone
is connected to the audio input connector;
set it to LINE when an audio mixer, etc. is
connected to the audio input connector.
Set this selector to MIC when a microphone
is connected to the audio input connector;
set it to LINE when an audio mixer, etc. is
connected to the audio input connector.
• The UTX-P1 does not support external
power supply. Do not connect a
microphone which requires external
power supply.
microphone which requires external
power supply.
• Do not set the INPUT selector to MIC
position while the audio signal is being
input from the audio mixer, etc. Doing so
may cause excessive audio input,
resulting in distorted playback or
recorded sound or damage to the
playback or recording equipment.
input from the audio mixer, etc. Doing so
may cause excessive audio input,
resulting in distorted playback or
recorded sound or damage to the
playback or recording equipment.
d Display section
Front side
Bottom side
Audio input level
INPUT selector
position
position
MIC
LINE
+8 dBV or more
—
On (red)
–9 dBV or more
and less than +8
dBV
and less than +8
dBV
—
On
(green)
(green)
Less than –9 dBV
—
Off
–40 dBV or more
On (red)
—
–60 dBV or more
and less than –40
dBV
and less than –40
dBV
On
(green)
(green)
—
Less than –60 dBV Off
—
Notes
The channel indication (D) for U30
model is shown.
model is shown.