Manualsbrain.com
  1. Manuals
  2. Brands
  3. Roland
  4. MC-909
  5. User Manual

Roland MC-909 User Manual

Download
Page of 180
 
106
Multi-Effects List
43: MULTI TAP DELAY 
 
(MFX2 only)
 
This effect provides four delays. Each of the Delay Time parameters 
can be set to a note length based on the selected tempo. You can also 
set the panning and level of each delay sound.
 
fig.MFX43
 
44: REVERSE DELAY 
 
(MFX2 only)
 
Adds the reverse of the input sound as a delay.
 
fig.MFX44
 
45: SHUFFLE DELAY 
 
(MFX2 only)
 
Adds a shuffle to the delay sound, giving the sound a bouncy delay 
effect with a swing feel.
 
fig.MFX45
 
Parameter
Value
Description
 
Delay 1–4
0–4000 ms, 
note
Adjusts the time until Delays 1–4 
are heard.
Pan 1–4
L64–63R
Stereo location of Delays 1–4
Level 1–4
0–127
Output level of Delays 1–4
Feedback 
#1
-98– +98 %
Adjusts the amount of the delay 
sound that’s fed back into the effect. 
Negative (-) settings invert the phase.
HF Damp
200–8000 
Hz, BY-
PASS
Adjusts the frequency above which 
sound fed back to the effect is fil-
tered out. If you don’t want to filter 
out any the high frequencies, set 
this parameter to BYPASS.
Low Gain
-15– +15 dB
Gain of the low frequency range
High Gain
-15– +15 dB
Gain of the high frequency range
Balance #2
D100:0W–
D0:100W
Volume balance between the direct 
sound (D) and the effect sound (W)
Level
0–127
Output level
 
Parameter
Value
Description
 
Threshold
0–127
Volume level at which the reverse 
delay begins 
Delay 1–4
0-2000 ms, 
note
Adjusts the time until Delays 1–4 
are heard.
Feedback 1 
#1
-98– +98 %
Adjusts the amount of the delay 
sound that’s fed back into the effect. 
Negative (-) settings invert the phase.
Feedback 4
HF Damp 1
200–8000 
Hz, BY-
PASS
Adjusts the frequency above which 
sound fed back to the effect is fil-
tered out. If you do not want to filter 
out any high frequencies, set this 
parameter to BYPASS.
HF Damp 4
Pan 1–3
L64–63R
Stereo location of Delays 1–3 sound
Level 1–3
0–127
Output level of Delays 1–3 sound
Balance #2
D100:0W–
D0:100W
Volume balance between the direct 
sound (D) and the effect sound (W)
Low Gain
-15– +15 dB
Gain of the low frequency range
High Gain
-15– +15 dB
Gain of the high frequency range
Level
0–127
Output level
L in
R in
L out
R out
Multi Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 3
Delay 4
Delay 2
Feed
back
2-Band
EQ
2-Band
EQ
Feedback 1
L in
R in
Rev. Delay
L out
R out
2-Band
EQ
2-Band
EQ
1
2
D1
Delay
3
D3
D2
D4
Feedback 4
 
Parameter
Value
Description
 
Delay #1
0–4000 ms, 
note
Adjusts the time until the delay 
sound is heard.
Shuffle 
Rate
0–100 %
Adjusts the ratio (as a percentage) 
of the time that elapses before Delay 
B sounds relative to the time that 
elapses before the Delay A sounds.
When set to 100%, the delay 
times are the same.
Pan A/B
L64–63R
Stereo location of Delay A/B
Level 
Balance
A100:0B–
A0:100B
Volume balance between Delay A 
and Delay B
Feedback 
#2
-98– +98 %
Adjusts the amount of the delay 
that’s fed back into the effect. Nega-
tive (-) settings invert the phase.
Accelera-
tion
0–15
Adjusts the time over which the De-
lay Time changes from the current 
setting to its specified new setting.
HF Damp
200–8000 
Hz, BY-
PASS
Adjusts the frequency above which 
sound fed back to the effect is fil-
tered out. If you don’t want to filter 
out any high frequencies, set this 
parameter to BYPASS.
Low Gain
-15– +15 dB
Gain of the low frequency range
High Gain
-15– +15 dB
Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct 
sound (D) and the effect sound (W)
Level
0–127
Output level
Feedback
L in
R in
Delay
L out
R out
2-Band
EQ
2-Band
EQ
A
B
Delay A
Delay B
MC-909_Ref_e.book 106 ページ ２００５年３月１日　火曜日　午後３時２９分