Roland PCR-50 User Manual

Edit mode (EDIT)

■

Perform steps 1–3.

Use the 

 buttons or the 

 or 

 keys to specify the USB DRIVER MODE.

Effective use is made of the USB bandwidth according to the amount of MIDI data to be 
transmitted, ensuring that MIDI data processing will always occur optimally.

Press the 

 button.

■

Perform steps 1–3.

Use the 

 buttons or the 

 or 

 keys to specify the GM2/LAST ACCESS 

MEMORY setting.

Press the 

 button.

■

Perform steps 1–3.

The display will indicate “RST”.

Press the 

 button.

The display will blink “YES”.

Press the 

 button.

FPT technology is used to perform high-speed 
MIDI transfer. Normally, we recommend that 
you use this mode.

Select this if you are using the standard MIDI 
driver provided by your operating system.

When the PCR starts up, memory number 0 (GM2) will 
be loaded into current memory (p. 148) regardless of the 
state in which the power was turned off.

Upon power-up, the PCR-30/50/80 will recall the 
memory that was last recalled or saved into current 
memory (p. 148) .