Справочник Пользователя для Roland PCR-50
156
Edit mode (EDIT)
■
Setting method D
Perform steps 1–3.
4
Use the
[DEC][INC]
buttons or the
[0]
or
[1]
keys to specify the USB DRIVER MODE.
*
FPT = Fast Processing Technology for MIDI Transmission:
Effective use is made of the USB bandwidth according to the amount of MIDI data to be
transmitted, ensuring that MIDI data processing will always occur optimally.
transmitted, ensuring that MIDI data processing will always occur optimally.
5
Press the
[ENTER]
button.
■
Setting method E
Perform steps 1–3.
4
Use the
[DEC][INC]
buttons or the
[0]
or
[1]
keys to specify the GM2/LAST ACCESS
MEMORY setting.
5
Press the
[ENTER]
button.
■
Setting method F
Perform steps 1–3.
4
The display will indicate “RST”.
5
Press the
[ENTER]
button.
6
The display will blink “YES”.
7
Press the
[ENTER]
button.
0
Original driver
FPT technology is used to perform high-speed
MIDI transfer. Normally, we recommend that
you use this mode.
MIDI transfer. Normally, we recommend that
you use this mode.
1
Generic driver
Select this if you are using the standard MIDI
driver provided by your operating system.
driver provided by your operating system.
0
GM2 MEMORY
When the PCR starts up, memory number 0 (GM2) will
be loaded into current memory (p. 148) regardless of the
state in which the power was turned off.
be loaded into current memory (p. 148) regardless of the
state in which the power was turned off.
1
LAST ACCESS
MEMORY
MEMORY
Upon power-up, the PCR-30/50/80 will recall the
memory that was last recalled or saved into current
memory (p. 148) .
memory that was last recalled or saved into current
memory (p. 148) .