Edirol UA-1000 User Manual

Basic connections and settings

Capturing sound from an external ADAT device

fig.basic

●

Connections

Connect an optical cable to the OPTICAL IN jack.

●

Sampling frequency select switch

Select either 44.1 kHz or 48 kHz.

Set this to the same sampling frequency as specified for your ADAT or recording software.

●

ADAT mode switch and external clock switch

fig.adat-sig

Simultaneously press the

ADAT mode

switch

and

external clock switch

The PEAK/SIG/ADAT IN indicators
will light orange simultaneously.

fig.adat-sig2

When audio signals are input from the
ADAT to the UA-1000, the PEAK/
SIG/ADAT IN indicators will light
green.

* If the word clock input connector is connected, the word clock input connector will take priority for

synchronization. In this case, the ADAT connected to the digital input connector must also be synchronized
to the word clock.

Optical cable

OUTPUT

OPTICAL IN

Set the sampling

frequency

Lit (orange)

Press simultaneously

Lit (green)

UA-1000_e.book 30 ページ２００３年８月６日　水曜日　午前１１時５２分