Roland XV-88 User Manual

If there has been a mistake in operation, or if the XV-88 is 
unable to continue processing as you directed, an error 
message will appear in the display. Take the appropriate 
action for the displayed error message.

fig.err01

The internal backup battery of the XV-88 (a 
battery that maintains data in the user memory) 
has run down.

Consult your dealer or a nearby Roland service 
station to have the battery replaced.

fig.err02

The XV-88 cannot handle this file.

fig.err03

It was not possible to save/load a file.

Try the operation once again. If the same 
message appears, that file has been damaged. 
Delete the damaged file.

fig.err04

A file of the same name exists on the memory 
card.

Use a different file name.

fig.err05

A file name has not been assigned.

Assign a file name.

fig.err06

The specified file was not found.

Insert the memory card that contains the 
specified file, and try the operation once again.

fig.err07

There is insufficient space available on the 
memory card to save the data.

Either insert a different memory card, or delete 
unnecessary data and try the operation once 
again.

fig.err08

It is possible that the memory card has been 
scratched or otherwise damaged. 

If the memory card has been damaged, do not 
use that memory card. If the same error message 
appears repeatedly, consult your dealer or a 
nearby Roland service station. 

fig.err09

A memory card is not inserted in the MEMORY 
CARD slot. 

Turn off the power, and insert a memory card.

fig.err10

Since a write protect seal is affixed to the 
memory card, data cannot be saved to the card 
bank.

Remove the write protect seal from the memory 
card.

fig.err11

Due to an inordinate volume of MIDI messages 
received, the XV-88 has failed to process them 
properly.

Reduce the amount of MIDI messages to be 
transmitted.