Roland JM-5 User Manual
1
Model:
JM-5
Date:
July 2011
Version:
1.00
MIDI Implementation
1. Received data
■
Channel Voice Messages
●
Note off
●
Note on
• Not received when Rx.NOTE MESSAGE= OFF. (Initial value is ON)
●
Polyphonic Key Pressure
• The resulting effect is determined by System Exclusive messages. With
the initial settings, there will be no effect.
●
Control Change
• The value specified by a Control Change message will not be reset even
by a ProgramChange, etc.
❍
Bank Select (Controller number 0, 32)
• Bank Select processing is suspended until a program change is received.
❍
Modulation (Controller number 1)
• Not received when Rx.MODULATION= OFF (Initial value is ON).
• The resulting effect is determined by System Exclusive messages. With
• The resulting effect is determined by System Exclusive messages. With
the initial settings, this is Pitch Modulation Depth.
❍
Portamento Time (Controller number 5)
❍
Data Entry (Controller number 6, 38)
❍
Volume (Controller number 7)
• Volume messages are used to adjust the volume balance of each Part.
• Not recevied when “Volume” RX Event is off.
• Not recevied when “Volume” RX Event is off.
❍
Pan (Controller number 10)
• Not received when “PanPot” RX Event is Off
❍
Expression (Controller number 11)
• Not received when "Expression" RX Event is Off.
❍
Hold 1 (Controller number 64)
• Not received when “Hold” RX Event is Off.
❍
Portamento (Controller number 65)
❍
Sostenuto (Controller number 66)
• Not received when “Sostenuto” RX Event is Off.
Status
2nd byte
3rd byte
8nH
kkH
ccH
9nH
kkH
00H
n= MIDI channel number:
0H~FH (Ch.1~16)
kk= note number:
00H~7FH (0~127)
vv= note off velocity:
00H~7FH (0~127)
Status
2nd byte
3rd byte
9nH
kkH
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
kk= note number:
00H~7FH (0~127)
vv= note on velocity:
01H~7FH (1~127)
Status
2nd byte
3rd byte
AnH
kkH
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
kk= note number:
00H~7FH (0~127)
vv= key pressure:
00H~7FH (0~127)
Status
2nd byte
3rd byte
BnH
00H
mmH
BnH
20H
llH
n= MIDI channel number:
0H~FH (Ch.1~16)
mm= Bank number MSB:
00H~7FH
Initial value= 00H
Initial value= 00H
ll= Bank number LSB:
00H~7FH
Status
2nd byte
3rd byte
BnH
01H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Modulation depth:
00H~7FH (0~127)
Status
2nd byte
3rd byte
BnH
05H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Portamento Time:
00H~7FH (0~127),
Initial value= 00H (0)
Initial value= 00H (0)
Status
2nd byte
3rd byte
BnH
06H
mmH
BnH
26H
llH
n= MIDI channel number:
0H~FH (Ch.1~16)
mm, ll= the value of the parameter specified by RPN/NRPN
mm= MSB, ll= LSB
mm= MSB, ll= LSB
Status
2nd byte
3rd byte
BnH
07H
vvH
n= MIDI channel number
0H~FH (Ch.1~16)
vv= Volume:
00H~7FH (0~127),
Initial value= 64H (100)
Initial value= 64H (100)
Status
2nd byte
3rd byte
BnH
0AH
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= pan:
00H~40H~7FH (Left~Center~Right),
Initial value= 40H (Center)
Initial value= 40H (Center)
Status
2nd byte
3rd byte
BnH
0BH
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Expression:
00H~7FH (0~127), Initial value= 7FH (127)
Status
2nd byte
3rd byte
BnH
40H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Control value:
00H~7FH (0~127)
Status
2nd byte
3rd byte
BnH
41H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Control value:
00H~7FH (0~127) 0~63= OFF, 64~127=
ON
ON
Status
2nd byte
3rd byte
BnH
42H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Control value:
00H~7FH (0~127) 0~63= OFF, 64~127= ON