Tektronix 070-A830-51 User Manual

AWG710 Service Manual

6-1

Maintenance

This section contains the information needed to perform periodic and corrective
maintenance on the AWG710 Arbitrary Waveform Generator. 
The following subsections are included:

 Related Maintenance Procedures. Provides information relating to various

sections discussing maintenance.

 Preparation. Introduction plus general information on preventing damage to

internal modules when doing maintenance.

 Inspection and Cleaning. Information and procedures for inspecting the

waveform generator and cleaning the external and internal modules.

 Removal and Installation Procedures. Procedures for the removal of

defective modules and replacement of new or repaired modules.

 Troubleshooting. Information for isolating failed modules. Included are

instructions for operating the waveform generator internal diagnostic
routines and troubleshooting trees. Most of the trees make use of these
internal diagnostic routines to speed fault isolation to a module.

Related Maintenance Procedures

The following subsections contain information and procedures related to
maintenance.

  Operating Information provides useful troubleshooting instructions when

operating the waveform generator. It also details the service strategy and lists
options for obtaining maintenance service and replacing failed modules.

 Theory of Operation contains a circuit description at the module, or block,

level.

 Performance Verification provides procedures that may be useful in isolating

modules problems by testing the waveform generator performance.

 Adjustment Procedures addresses after repair adjustment and the interval

between periodic adjustments. It contains a procedure for adjusting the
internal circuits of the waveform generator.

 Diagrams contains a block diagram using individual modules as blocks and

an interconnection diagram showing connections between the modules.

 Replaceable Mechanical Parts lists all field replaceable modules by part

number.