Grizzly G0758 User Manual
-4-
Model G0758 (Mfd. Since 2/14)
Controls &
Components
A. High/Low Gearbox Knob: Selects low gear
"L" for maximum torque from 50–1000 RPM,
or high gear "H" for 100–2000 RPM.
or high gear "H" for 100–2000 RPM.
B. Drawbar Cap/Drawbar: Drawbar secures
collets and tooling in the spindle.
C. Z-Axis Handwheel: Raises and lowers head-
stock.
D. Z-Axis Travel Locks: Locks position of
headstock to column.
E. Downfeed Selector Knob: Selects between
fine and coarse vertical quill travel.
Figure 3. G0758 controls (right side).
Figure 4. G0758 controls (front side).
C
B
A
D
E
F
G
H. Variable-Speed Knob: Controls spindle
speed.
I. Variable-Speed Digital Readout Unit
(DRO): Displays spindle speed.
J. ON Button: Supplies power for spindle rota-
tion.
K. OFF Button: Disconnects power for spindle
rotation
.
L. Spindle Downfeed Digital Readout Unit
(DRO): Displays a precise reading of verti-
cal positioning of spindle. It can be zeroed
at any position and manually increased or
decreased independent of spindle position
when operation requires it.
cal positioning of spindle. It can be zeroed
at any position and manually increased or
decreased independent of spindle position
when operation requires it.
M. Quill Lock Lever: Locks vertical position of
quill when tightened.
H
I
J
K
L
M
Refer to
Figures 3 & 4 and the following descrip-
tions to become familiar with the basic controls of
this machine.
this machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
F. Coarse Downfeed Handle: Provides coarse
control over vertical quill travel.
G. Fine Downfeed Handwheel: Provides fine
control over vertical quill travel.