Zebra Technologies MP User Manual

UMAN-Charge

18

The UC series of Charger/Conditioners is designed to

charge and condition individual battery packs used on the
MP, RP, Encore and Cameo series of portable printers.
Battery packs may be charged off-unit or while connected
to the printer.  Typical charge time is 60 to 90 minutes.

Plug the A.C. line cord into an A.C. receptacle, then plug

the charge cable into the battery pack’s charger jack.  The
“Power” light will come on, followed by the “Charge” light.
When the Battery Pack has been fully charged, the “Charge
OK” indicator will light.

NiCad type battery packs used on a daily basis should be

“conditioned” once a week to insure they keep their maxi-
mum charge life.  This is especially important with batteries
that are usually recharged with the Trickle Charger.

1. Connect the Charger to an A.C. power

source.

2. Plug the charger into the

battery pack’s charger jack.
Wait 5 seconds.

3. Press and hold

the “Condition”
button for
1 second
until the
red
“Condi-
tioning”
indicator
lights .