Xantrex Technology TC2 204060 User Manual

Page of 76
46
Truecharge2 Series Battery Charger Owner’s Guide
Using A Generator As Source Power
The Truecharge2 Battery Charger can be run from a regular AC power 
source or from an alternate power source such as a generator. Refer to “AC 
Input Specifications” on page 54 
for AC input current draw to determine 
the size of generator you need. Many generators provide output voltage that 
is modified sine wave or modified square wave (MSW) rather than the true 
sine wave (TSW) that your utility provides.
If a generator needs to run on full load capacity to supply charging current 
to the battery via the battery charger, its output frequency and amplitude 
may become unstable. This scenario can cause the battery charger to 
shutdown. Using the current limiting feature
1
 from the remote panel can 
help avoid this scenario. 
The Truecharge2 Battery Charger may be used with MSW generators but 
its lifetime may be reduced somewhat depending on the severity of any 
peak voltage overshoots, and the severity of waveshape rise times.
1.See “Configuring the Maximum Output Current Percentage of the Charger” on the
Truecharge2 Remote Panel Owner’s Guide.
TC2 204060 Series BattChg Owners Guide.book  Page 46  Friday, July 8, 2011  11:44 AM