Grizzly G9860 User Manual
-14-
Extreme series Jointer (Mfg. since 9/11)
Inventory
the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Inventory: (Figure 9)
Qty
a. Fence assembly ......................................... 1
b. Cutterhead guard ....................................... 1
c. push Blocks ................................................ 2
D. Fence support (g9860/g9860zX) ............. 1
E. Fence lock assembly (g9860/g9860zX) . 1
F. Fence tilt handle ....................................... 1
hardware & Tools: (not shown)
Qty
•
Combo Wrench 10mm ............................... 1
•
open-End Wrench 11/13mm ...................... 1
•
hex Wrenches 3, 4, 5, 6, 8mm ...............
1 Each
1 Each
•
Knife Cutterhead Models:
—Knife setting gauge ............................... 1
•
spiral Cutterhead Models:
—pneumatic torque Wrench assembly..... 1
— t-handle driver ....................................... 1
— torx Bits t-20 ........................................ 15
— indexable inserts 14 x 14 x 2mm .......... 10
— Flat head torx screws t-20 M6-1 x 15.. 30
—pneumatic torque Wrench assembly..... 1
— t-handle driver ....................................... 1
— torx Bits t-20 ........................................ 15
— indexable inserts 14 x 14 x 2mm .......... 10
— Flat head torx screws t-20 M6-1 x 15.. 30
the unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. remove
this protective coating with a solvent cleaner
or degreaser, such as shown in
oil to prevent corrosion during shipment. remove
this protective coating with a solvent cleaner
or degreaser, such as shown in
Figure 10. For
thorough cleaning, some parts must be removed.
For optimum performance, clean all moving
parts or sliding contact surfaces. avoid chlo-
rine-based solvents, such as acetone or brake
parts cleaner that may damage painted surfac-
es. always follow the manufacturer’s instructions
when using any type of cleaning product.
rine-based solvents, such as acetone or brake
parts cleaner that may damage painted surfac-
es. always follow the manufacturer’s instructions
when using any type of cleaning product.
clean up
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOT use these products
to clean the machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
G2544—Solvent cleaner & Degreaser
h9692—Orange power Degreaser
great products for removing shipping grease.
h9692—Orange power Degreaser
great products for removing shipping grease.
Figure 10. Cleaner/degreasers available from
grizzly.
Figure 9. inventory.
a
B
C
d
E
F