Grizzly G0705 User Manual
Model g0705 (Mfg. since 09/09)
-21-
assembly
assembly of the Model g0705 consists of attach-
ing the three handwheel handles to the machine.
ing the three handwheel handles to the machine.
to assemble your machine:
1. use one M6-1 x 16 cap screw and 6mm flat
washer to install each handwheel in the loca-
tions shown in
tions shown in
figure 20.
figure 20.
Table handwheel handles.
mounting to a Workbench
if you are placing the machine on an existing
workbench, it must be securely attached to the
workbench.
workbench, it must be securely attached to the
workbench.
the strongest mounting option is a "through
Mount" where holes are drilled all the way through
the workbench, and hex bolts, washers, and hex
nuts are used to secure machine to the work-
bench.
Mount" where holes are drilled all the way through
the workbench, and hex bolts, washers, and hex
nuts are used to secure machine to the work-
bench.
Machine Base
Workbench
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
figure 18. example of a through mount setup.
Machine Base
Workbench
Lag Screw
Flat Washer
figure 19. example of a direct mount setup.
another option for mounting is a "direct Mount"
where the machine is simply secured to the work-
bench with a lag screw.
where the machine is simply secured to the work-
bench with a lag screw.