Grizzly G0705 User Manual

Model g0705 (Mfg. since 09/09)

-23-

before starting the machine, make sure you

have performed the preceding assembly

and adjustment instructions, and you have

read through the rest of the manual and

are familiar with the various functions and

safety features on this machine. failure to

follow this warning could result in serious

personal injury or even death!

test run

once  the  assembly  is  complete,  test  run  your
machine  to  make  sure  it  runs  properly  and  is
ready for regular operation. the test run consists
of verifying the following: 1) the motor powers up
and  runs  correctly  and  2)  the  stop  button  safety
feature works correctly.

if, during the test run, you cannot easily locate
the source of an unusual noise or vibration, stop
using the machine immediately, then review

troubleshooting on page 41.

if you cannot find a remedy, contact our tech
support at (570) 546-9663 for assistance.

to test run the machine:

1. Make sure you understand the safety instruc-

tions at the beginning of the manual and that
the machine is set up properly.

2. Make sure all tools and objects used during

setup are cleared away from the machine.

3. Connect the machine to the power source.

4. push the eMergenCy stop button in,

then twist it clockwise (see

figure 22) so it

pops out. When the eMergenCy stop
button pops out, the switch is reset and ready
for operation.

5. verify that the machine is operating correctly

by pushing the ForWard button.

—When operating correctly, the machine

runs smoothly with little or no vibration or
rubbing noises.

— investigate and correct strange or unusual

noises  or  vibrations  before  operating  the
machine further. always turn the machine
off,  then  disconnect  the  machine  from
power  when  investigating  or  correcting
potential problems.

figure 22. resetting the switch.