Grizzly G0705 User Manual

Model g0705 (Mfg. since 09/09)

-25-

section 4: operations

damage to your eyes and lungs could result

from using this machine without proper pro-

tective gear. always wear safety glasses and

a respirator when operating this machine.

NOTICE

if you have never used this type of machine

or equipment before, We strongly rec-

ommend that you read books, review

industry trade magazines, or get formal

training before beginning any projects.

regardless of the content in this section,

grizzly industrial will not be held liable for

accidents caused by lack of training.

loose hair, clothing, or

jewelry could get caught

in machinery and cause

serious personal injury.

Keep these items away

from moving parts at all

times to reduce this risk.

to reduce the risk of

serious injury when using

this machine, read and

understand this entire

manual before beginning

any operations.

operation overview

the purpose of this overview is to give the opera-
tor a basic understanding of how this machine
operates—the big picture view of normal opera-
tions on this machine. Key concepts touched on
here are covered in greater detail in later subsec-
tions. this overview is not intended to be a set of
detailed instructions.

to complete a typical operation, the operator

does the following:

1. loosens the vertical travel locks, then adjusts

the  headstock  height  above  the  table  to
ensure  there  is  sufficient  room  to  install  the
tooling  in  the  spindle  and  the  workpiece  on
the table.

2. installs the desired tooling for the job.

3. positions the workpiece as needed for the

operation, then clamps the workpiece using
applicable clamping devices, or a vise that is
already mounted on the table, to ensure the
workpiece does not move during the milling/
drilling operation.

4. positions the cutter or drill bit near the

workpiece, then tightens vertical travel locks.

5. selects the appropriate spindle speed for the

milling or drilling operation using the speed
selector knob and variable spindle speed
knob.

6. unlocks the X- and y-axis table locks.

7. Wears safety glasses or a face shield.