Grizzly G0705 User Manual
-38-
Model g0705 (Mfg. since 09/09)
section 6: maintenance
always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
follow this maintenance schedule and refer to any
specific instructions given in this section.
daily check:
•
•
Make sure mill/drill is disconnected from
power when not in use.
power when not in use.
•
Check for loose mounting bolts.
•
Make sure mill/drill is clean and lubricated.
•
Check for worn or damaged wires.
•
Check for any other unsafe condition.
monthly check:
•
•
Check that gibs are adjusted properly.
biannual check:
•
•
lubricate table leadscrews.
schedule
Metal chips left on the machine that have been
soaked with water-based coolant will invite oxi-
dation and a gummy residue buildup around the
moving parts. use a brush and shop vacuum to
remove chips and debris from the working sur-
faces of the mill. never blow off the mill with com-
pressed air, as this will force metal chips deep into
the mechanisms and may cause injury to yourself
or bystanders.
soaked with water-based coolant will invite oxi-
dation and a gummy residue buildup around the
moving parts. use a brush and shop vacuum to
remove chips and debris from the working sur-
faces of the mill. never blow off the mill with com-
pressed air, as this will force metal chips deep into
the mechanisms and may cause injury to yourself
or bystanders.
remove any rust build-up from unpainted cast
iron surfaces of your mill and treat them with a
non-staining lubricant after cleaning.
iron surfaces of your mill and treat them with a
non-staining lubricant after cleaning.
Keep unpainted cast iron surfaces rust-free with
regular applications of products like g96
regular applications of products like g96
®
gun
treatment, slipit
®
, or Boeshield
®
t-9 (see the
grizzly catalog or website).
cleaning and
protecting