Denso BHT-7500S User Manual

69

Chapter 2.  Getting Started the BHT and System Mode

Selecting the "2:M1 KEY," "3:M2 KEY," "4:M3 KEY"
or "5:M4 KEY" on the SET KEY menu calls up the
screen as shown at left.  (This example appears
when the "4:M3 KEY" is selected.)

Highlighted is the current setting.

The  M1 ,  M2 ,  M3  or  M4  key can function as
listed below.

 1  None:

The key entry will be ig-
nored.

 2  Trigger Switch:

As the trigger switch.

 3  Shift Key:

As the  SF  key.

 4  Enter Key:

As the  ENT  key.

 5  Backlight Key:

As  the  backlight  function
on/off key.

Select a desired setting by using the numerical
keys or 

 and 

 keys, and then press the  ENT

key.  The screen returns to the SET KEY menu.

Defining the function of  M1 ,  M2 ,  M3  (left-hand trigger switch), or  M4  (right-hand
trigger switch) key

The  M3  and  M4  keys are assigned the trigger switch function by default.  You can
make them function as the  SF  key,  ENT  key, or backlight function on/off key.

If you define the  M1  key as the backlight function on/off key, pressing the  M1  key
activates or deactivates the backlight function.

In user programs, a string data can also be assigned to these magic keys.

The backlight function on/off key can be assigned only to any one of  M1  through

M4  keys.  The key defined more recently will act as the backlight function on/off

key and one defined earlier will be ignored.

That is, if you define the  M1  and  M2  keys as the backlight function on/off key in
this order, the  M2  key will work as the backlight function on/off key and the  M1
key's entry will be ignored.

        SET M3 KEY

     1:None

     

2:Trigger Switch

     3:Shift Key

     4:Enter Key

     5:Backlight Key