Denso BHT-7500S User Manual
71
Chapter 2. Getting Started the BHT and System Mode
[4.8-1] Setting the TCP/IP
Selecting "1:SET TCP/IP" on the SET TCP/IP menu
calls up the screen shown at left where the current
settings are displayed.
calls up the screen shown at left where the current
settings are displayed.
Select a desired item by using the numerical keys
or
or
and
keys, and then press the ENT key.
The entry box of the selected item becomes ready
to accept entry and shows a cursor.
to accept entry and shows a cursor.
Enter the desired value by using the numerical
keys and then press the ENT key.
keys and then press the ENT key.
In the entry mode, to delete a single character,
press the BS key ( SF + C keys). To delete the
whole entry you made, press the C key.
press the BS key ( SF + C keys). To delete the
whole entry you made, press the C key.
To return to the SET TCP/IP menu, press the C key
when any item is highlighted.
when any item is highlighted.
SET ADDRESS
1:IP ADDRESS
[XXX.XXX.XXX.XXX ]
2:SUBNET MASK
[YYY.YYY.YYY.YYY ]
3:DEFAULT GATEWAY
[ZZZ.ZZZ.ZZZ.ZZZ ]