Lexmark S415 User Manual
Scanning
ADF
Scanner glass
Use the ADF for multiple
‑page documents.
Note: The ADF is available only in select printer
models. If you purchased a printer without an ADF,
then load original documents or photos on the
scanner glass.
models. If you purchased a printer without an ADF,
then load original documents or photos on the
scanner glass.
Use the scanner glass for single pages, small items
(such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
(such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
Tips for scanning
•
Use the scanner glass when scanning two
‑sided pages if your printer does not support duplex scanning
or the ADF does not support the original document size.
•
When using the ADF, adjust the paper guide on the ADF to the width of the original document.
•
When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned
image.
image.
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF. Place these items on the scanner glass.
magazine clippings) into the ADF. Place these items on the scanner glass.
•
When the document to be scanned is in place with the settings you want, press
to start scanning.
Scanning to a local computer
1
Load the original document faceup into the ADF or facedown on the scanner glass.
2
From the printer control panel, navigate to:
> Scan >
O K
> Computer > USB
‑Connected Computer >
O K
The USB
‑connected computer will receive the scan by default.
Note: Make sure the scan software is installed on the destination computer.
3
Press the up or down arrow button to scroll to the scan option you want to set, and then press the
left or right arrow button to scroll to the setting you want.
left or right arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
O K
each time
you make a selection.
4
Press
.
Scanning to a flash drive or memory card
Notes:
•
Some features are available only in select printer models.
•
Make sure your flash drive or memory card is not write
‑protected.
1
Load the original document faceup into the ADF or facedown on the scanner glass.
2
From the printer control panel navigate to:
> Scan >
O K
> Memory Device
3
Insert the flash drive or memory card, and then press
O K
.
Note: The printer reads only one memory device at a time.
4
Press the up or down arrow button to scroll to the scan option you want to set, and then press the
left or right arrow button to scroll to the setting you want.
left or right arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
O K
each time
you make a selection.
5
Press
.
Follow the instructions on the printer display.
Scanning directly to e
‑mail using the printer software
Make sure you have set up your e
‑mail settings before proceeding. For more information, see the section
on e
‑mailing in the User’s Guide.
For Windows users
1
Load an original document faceup into the ADF or facedown on the scanner glass.
2
From the computer, do the following:
In Windows 8
From the Search charm, type Printer Home, and then navigate to:
Printer Home > select your printer > Scan
Scanning
27