Lexmark X342n User Manual
Cleaning the MFP
67
Cleaning the MFP
To maintain print quality, follow these cleaning procedures each time the toner cartridge is replaced
or if print quality problems occur.
or if print quality problems occur.
Warning:
Do not put water directly on the MFP or use ammonia–based cleaners or volatile
solvents, such as paint thinner, on the MFP.
solvents, such as paint thinner, on the MFP.
Cleaning the scanner glass
1
Slightly dampen a soft, lint–free cloth or paper towel with water.
2
Open the top cover.
3
Wipe the surfaces of the scanner glass and ADF until they are clean and dry.
4
Wipe the underside of the white top cover and white sheet until it is clean and dry.
5
Close the top cover.
Cleaning the outside of the MFP
Wipe the outside surface of the MFP with a soft, clean, lint–free cloth. If you dampen the cloth slightly
with water, be careful not to let any water drip onto or inside the MFP.
with water, be careful not to let any water drip onto or inside the MFP.