Konica Minolta C30P User Manual
Maintaining the Printer
167
Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the toner cartridges.
well-lit places; light may damage the toner cartridges.
Do not open the printer during printing.
Do not tap media stacks on the printer.
Do not lubricate or disassemble the printer.
Do not tilt the printer.
Do not touch the electrical contacts, gears, or laser devices. Doing so
may damage the printer and cause the print quality to deteriorate.
may damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
too high, your printer may experience media misfeeds and excessive
media curl.
Make sure two people are avail-
able to lift the printer when mov-
ing it.
Keep the printer level to avoid
toner spillage.
able to lift the printer when mov-
ing it.
Keep the printer level to avoid
toner spillage.
When lifting the printer, fold up
Tray 1, and then lift the printer as
shown in the illustration at the
right.
Tray 1, and then lift the printer as
shown in the illustration at the
right.
Even if an optional lower feeder
unit is installed, be sure to lift the
printer as shown below. Do not
grasp the grip of Tray 3, Tray 4
or the right side cover; other-
wise, the lower feeder unit may
be damaged.
unit is installed, be sure to lift the
printer as shown below. Do not
grasp the grip of Tray 3, Tray 4
or the right side cover; other-
wise, the lower feeder unit may
be damaged.
Front
44 kg
97 lbs