KYOCERA 250ci User Manual

This section describes guidelines for choosing paper. 

Avoid using paper with bent corners or that is curled, dirty, or torn. Do not use paper that has a rough surface or 
paper fiber lint, or that is especially delicate. Use of paper in any of these conditions will not only deliver poor 
copies but may also cause jams and shorten the useful life of the machine. Choose paper with a smooth and even 
surface; however, avoid coated paper or paper with a treated surface as it may damage the drum or fusing unit.

Do not use paper such as paper that has been coated or surface-treated or paper that contains plastic or carbon. 
These paper may produce harmful fumes from the heat of printing and may damage the drum.

Be sure to use the standard paper that contains at least 80% pulp, i.e., not more than 20% of the total paper 
content consists of cotton or other fibers.

Paper of the following sizes is supported by the machine. 

Measurements in the table take into account a ±0.7 mm dimensional accuracy for length and width. Corner 
angles must be 90° ± 0.2°. 

A6-R (105 × 148 mm)

A3 (297 × 420 mm)

B6-R (128 × 182 mm)

B4 (257 × 364 mm)

Hagaki (100×148mm)

A4 (297 × 210 mm)

Oufuku Hagaki (148 × 200 mm)

A4-R (210 × 297 mm)

Executive (7 1/4 ×10 1/2")

B5 (257 × 182 mm)

Envelope DL (110 × 220 mm)

B5-R (182 × 257 mm)

Envelope C5 (162 × 229mm)

A5-R (148 × 210 mm)

Envelope C4 (229 × 324mm)

Folio (210 × 330 mm)

ISO B5 (176 × 250 mm)

Ledger

Envelope #10 (Commercial #10) (4 1/8 × 9 1/2")

Legal

Envelope #9 (Commercial #9) (3 7/8 × 8 7/8")

Letter

Envelope #6 (Commercial #6 3/4) (3 5/8 × 6 1/2")

Letter-R

Envelope Monarch (3 7/8 ×7 1/2")

Statement-R

Youkei 2 (114 × 162 mm)

Oficio II

Youkei 4 (105 × 235 mm)

8.5 × 13.5"