HP (Hewlett-Packard) 2405 (Q3086A) User Manual
reference guide
fax setup
127
fa
x setup
This allows a direct connection between the HP PSC and your answering
machine, even though the PC modem is connected first in line.
machine, even though the PC modem is connected first in line.
Caution!
If you do not connect your answering machine in this
way, fax tones from a sending fax machine might be recorded on
your answering machine, and you might not be able to receive
faxes with your HP PSC.
your answering machine, and you might not be able to receive
faxes with your HP PSC.
5
Set your answering machine to answer after 4 or fewer rings.
6
Change the Rings to Answer setting on your HP PSC to 6 rings.
For information on how to change this setting, see
For information on how to change this setting, see
7
Using the phone cord supplied in the box with your HP PSC, connect one
end to your telephone wall jack, then connect the other end to the port
labeled “1-LINE” on the back of your HP PSC.
end to your telephone wall jack, then connect the other end to the port
labeled “1-LINE” on the back of your HP PSC.
Caution!
If you do not use the supplied cord to connect from the
telephone wall jack to your HP PSC, you might not be able to fax
successfully. This special 2-wire phone cord is different from the
more common 4-wire cords you might already have in your office.
For more information about how to tell the difference between the
cords, see
successfully. This special 2-wire phone cord is different from the
more common 4-wire cords you might already have in your office.
For more information about how to tell the difference between the
cords, see
8
(Optional) If your answering machine has no built-in phone, for
convenience you might want to connect a phone to the back of your
answering machine at the “out” port.
convenience you might want to connect a phone to the back of your
answering machine at the “out” port.
how your hp psc will answer fax calls
You set the HP PSC to answer after 6 rings, and you set your answering
machine to answer after 4 or fewer rings. This ensures that your answering
machine will always answer before the HP PSC.
When the phone rings, your answering machine will answer after the
number of rings you have set, and then play your recorded greeting. The
HP PSC monitors the call during this time, “listening” for fax tones. If
incoming fax tones are detected, the HP PSC will emit fax reception tones
and receive the fax; if there are no fax tones, the HP PSC stops monitoring
the line and your answering machine can record a voice message.
machine to answer after 4 or fewer rings. This ensures that your answering
machine will always answer before the HP PSC.
When the phone rings, your answering machine will answer after the
number of rings you have set, and then play your recorded greeting. The
HP PSC monitors the call during this time, “listening” for fax tones. If
incoming fax tones are detected, the HP PSC will emit fax reception tones
and receive the fax; if there are no fax tones, the HP PSC stops monitoring
the line and your answering machine can record a voice message.
case H: shared voice/fax line with voicemail
If you receive both voice calls and fax calls at the same phone number, and you
also subscribe to a voicemail service through your phone company, connect
your HP PSC as described in this section.
also subscribe to a voicemail service through your phone company, connect
your HP PSC as described in this section.
Note:
The HP PSC cannot receive faxes automatically if you have a
voicemail service, therefore, you must be available to respond in person to
incoming fax calls manually. If you want to receive faxes automatically
instead, contact your phone company to subscribe to a distinctive ringing
service, or to obtain a separate phone line for faxing.
incoming fax calls manually. If you want to receive faxes automatically
instead, contact your phone company to subscribe to a distinctive ringing
service, or to obtain a separate phone line for faxing.