HP (Hewlett-Packard) 2405 (Q3086A) User Manual

73

Most print settings are automatically handled by the software application you are 
printing from or by HP ColorSmart technology. You need to change the settings 
manually only when you change print quality, print on specific types of paper or 
film, or use special features.

If you have a photo memory card, you can select and print photos 

directly from it using the HP PSC. For information, see 

This section contains the following topics:

For more information on performing special print jobs, see the onscreen HP Photo 
& Imaging Help that came with your software.

Follow these steps to print from the software application that you used to create 
your document.

Load the input tray with the appropriate paper.
For more information, see 

From your software application’s 

 menu, click 

.

Make sure that you select the HP PSC to print.
If you need to change settings, click the button that opens the Properties 
dialog box (depending on your software application, this button might be 
called Properties, Options, Printer Setup, or Printer), and then select the 
appropriate options for your print job by using the features available in 
the Paper/Quality, Finishing, Effects, Basics, and Color tabs.

When printing a photo, you must select options for the correct paper 

type and photo enhancement. You might also want to use the photo print 
cartridge for superior print quality. For information on ordering print 
cartridges, see the Reference Guide. For more information on installing 
print cartridges, see 

The settings you select apply only to the current print job. To set print 
settings for all jobs, see 

 on page 74.

Close the 

 dialog box.

Click 

 to begin your print job.