Kodak C110 User Manual

 53

Some problems can be resolved quickly by power cycling the printer: Turn off your 
printer. Wait five seconds. Turn on the printer. 

Use the following information to help troubleshoot problems with your printer.

Printer does not 
power on

• Make sure you are using the power cord that came with your printer. 

• Make sure that the power cord is connected to the AC adapter, the power cord is 

plugged into an outlet or power strip, and the LED on the AC adapter is lit.

Printer not detected

• Make sure your printer is plugged in and turned on.

• If you are using a USB cable, make sure that: 

– it is a USB 2.0 high-speed cable.
– it is connected to both your printer and your computer.
– you restart the computer if the USB cable was disconnected from the printer 

then reconnected, or if power to the printer was interrupted.

Carriage jam

• Open the printer access door and clear any obstructions.

• Check that the printhead and ink cartridges are installed correctly.

(The printhead and ink cartridges are installed correctly when you hear them click 
into place.)

Print quality

• For best results, use paper with the COLORLOK Technology logo on the package.

• Make sure the paper is loaded correctly. See 

 and 

• Clean the printhead:

– Press 

Home.

– Press 

 to select 

Maintenance, then press OK.

– Press 

 to select 

Clean Printhead, then press OK.

• Calibrate the printer:

– Press 

Home.

– Press 

 to select 

Maintenance, then press OK.

– Press 

 to select 

Calibrate Printer, then press OK.

• For more help, go to 

, then type

colors, 

blank prints, or other problem in the search field.

Ink cartridge 

• Check that KODAK Ink Cartridge(s) are installed. Do not use non-Kodak brand or 

refilled ink cartridges. 

• Remove, then install the cartridges again. Make sure the cartridges click into place.