Manualsbrain.com
  1. Manuals
  2. Brands
  3. Kodak
  4. ESP 5260
  5. User Manual

Kodak ESP 5260 User Manual

Download
Page of 62
www.kodak.com/go/aiosupport
8
KODAK ESP 5200 Series All-in-One Printer
8. When the confirmation message appears, press 
OK
.
9. If you haven’t yet installed the printer software, insert the CD that came with 
your printer, and install the software.
Using WPS to 
connect to a Wi-Fi 
network
If your router supports Wi-Fi Protected Setup (WPS), you can use WPS Connect. 
WPS lets you configure your printer for a wireless network by pressing buttons or 
entering a PIN.
To connect to a network using WPS:
1. Press 
Home
.
2. Press 
 to select 
Network Settings
, then press 
OK
.
3. With
 WiFi Setup Wizard 
selected, press 
OK
.
NOTE:  The Wi-Fi radio is turned on automatically when you select Wi-Fi Setup 
Wizard.
4. Press 
 to select 
WPS Connect
, then press 
OK
.
5. Select one of two methods of connecting: 
IMPORTANT: 
Before you press 
OK on the printer, make sure you know where the router's 
push button is, or where to enter the generated PIN.
If necessary, consult your Internet service provider or router device 
manufacturer’s documentation for more information.
• To use push buttons: 
a. With 
Push Button Configuration
 selected, press 
OK
. 
b. You will have two minutes to push the WPS button on your router (this may 
either be a physical button on the router or a virtual button in the router’s 
software). 
• To enter a PIN: 
a. Press 
 to select 
Generate WPS PIN
, then press 
OK
.
b. Go to your router’s software and locate the PIN button. 
c. Enter the PIN you received on the LCD into the PIN screen for your router. 
6. When the confirmation message appears, press 
OK
.
7. If you haven’t yet installed the printer software, insert the CD that came with 
your printer in your computer and install the software.
The printer with a wireless connection is listed as the name of the printer plus a 
number (for example, KodakESP5200+1133).