Ricoh IS 2425 User Manual
Troubleshooting When Using the Printer Function
48
4
Reference
“Printer Features”, General Settings Guide
“Printer Features”, General Settings Guide
The selected
file(s) which you
do not have ac-
cess privileges
to could not be
deleted.
You have tried to delete
files without the authori-
ty to do so.
files without the authori-
ty to do so.
Files can be deleted by the person who
created the file. To delete a file which
you are not authorized to delete, contact
the person who created the file.
created the file. To delete a file which
you are not authorized to delete, contact
the person who created the file.
Updating the des-
tination list...
Please wait.
Specified desti-
nation(s) or
sender's name has
been cleared.
The destination list is be-
ing updated from the
network using SmartDe-
viceMonitor for Admin.
Depending on the
number of destinations
to be updated, there may
be some delay before you
can resume operation.
Operations are not possi-
ble while this message is
displayed.
ing updated from the
network using SmartDe-
viceMonitor for Admin.
Depending on the
number of destinations
to be updated, there may
be some delay before you
can resume operation.
Operations are not possi-
ble while this message is
displayed.
Wait until the message disappears. Do
not switch off the power while this mes-
sage is displayed.
not switch off the power while this mes-
sage is displayed.
Parallel I/F
board has a prob-
lem.
An error has occurred in
the parallel interface
board.
the parallel interface
board.
Turn off the main power switch, and
back on again. If the message appears
again, contact your service representa-
tive.
back on again. If the message appears
again, contact your service representa-
tive.
Printer font er-
ror.
An error has occurred in
the font settings.
the font settings.
Check the font settings.
Memory Overflow
Maximum capacity of PCL
or PostScript 3 list display
has been exceeded.
or PostScript 3 list display
has been exceeded.
Reduce the value of [Resolution] in the
printer driver, or select [Frame Priority]
from [Memory Usage] in [System] (see
“Printer Features”, General Settings
Guide). If this message continues to ap-
pear after taking these steps, decrease
the number of files sent to the machine.
printer driver, or select [Frame Priority]
from [Memory Usage] in [System] (see
“Printer Features”, General Settings
Guide). If this message continues to ap-
pear after taking these steps, decrease
the number of files sent to the machine.
Message
Cause
Solution