Ricoh Network Guide User Manual

Connecting and Setting Up

38

❖ WINS Configuration

You can specify the WINS server
settings.
• On

If  [On] is selected, enter the
[

VWINS Server] IP address as

“xxx.xxx.xxx.xxx”(“x” indi-
cates a number).
If DHCP is in use, specify the
[Scope ID]

.

• Primary WINS Server
• Secondary WINS Server
• Scope ID

• Off

❒ Enter a [Scope ID] using up to 31

alphanumeric characters.

❒ Default: Off

❖ Effective Protocol

Select the protocol to use in the
network.
• TCP/IP:Effective/Invalid
• NetWare:Effective/Invalid
• SMB:Effective/Invalid
• AppleTalk:Effective/Invalid

❒ Default:  TCP/IP: Effective,  Net-

❖ NW Frame Type

Select the frame type when you
use NetWare.
• Auto Select
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP

❒ Default: Auto Select

❖ SMB Computer Name

Specify the SMB computer name.

❖ SMB Work Group

Specify the SMB work group.

❖ Ethernet Speed

Set the access speed for networks.
Select a speed that matches your
network environment. [Auto Select]
should usually be selected.
• Auto Select
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex

❒ Default: Auto Select

❖ LAN Type

When you have installed the op-
tional IEEE 802.11b interface unit,
select interface, IEEE 802.11b
(wireless LAN) or Ethernet.
• Ethernet
• IEEE 802.11b

❒ Default: Ethernet
❒ Appears when the optional IEEE

802.11b interface unit is installed.

❒ If Ethernet and IEEE 802.11b (wire-

less LAN) are both connected to
the machine, the selected interface
takes precedence.