Ricoh Network Guide User Manual

Setting Up the Machine on a Network

39

❖ Ping Command

Check the network connection
with ping command using given
IP address.

❒ If you fail to connect to the net-

work, check the following, and
then retry the ping command. 
• Check TCP/IP of the printer

is active. 

• Check that the machine with

assigned IP address is con-
nected to the network. 

• There is a possibility that same

IP address is used for the spec-
ified equipment .

❖ Permit SNMP V3 Communication

Set the encrypted communication
of SNMP v3.
• Encryption Only
• Encryption / Clear Text

❒ If you set to [Encryption Only],

you need to set password for
the machine.

❖ Permit SSL / TLS Communication

Set the encrypted communication
of SSL/TLS.
• Ciphertext Only
• Ciphertext Priority
• Ciphertext / Clear Text

❒ Default: Ciphertext Priority
❒ If you set to [Encryption Only], you

need to install the server authen-
tification for the machine.

❖ Host Name

Specify the host name.

❖ Machine Name

Specify the machine name.

Preparation
You must install the optional IEEE
1394 interface board in the ma-
chine.

❖ IP Address

When you connect the machine to
a network using the IEEE 1394 in-
terface, you must configure the IP
address and subnet mask.
• Auto-Obtain (DHCP)
• Specify

When you select [Specify], enter
the [IP Address] and [Sub-net
Mask]

 as “xxx.xxx.xxx.xxx”(“x”

indicates a number).
• IP Address: 011.022.033.044
• Sub-net Mask: 000.000.000.000

❒ Default: Auto-Obtain (DHCP)
❒ If you use the interface for Eth-

ernet and IEEE 1394 (IP over
1394) at the same time, settings
must be made carefully. See
p.139 “Using DHCP”

❒ When you use the IEEE 1394 in-

terface on a network, you can-
not use the Ethernet interface in
the same domain. To use both
interfaces in the same domain,
set different values for the [Sub-
net Mask]

.

❒ The physical address (EUI-64)

also appears.

❖ DDNS Configuration

You can specify the DDNS set-
tings.
• Active
• Inactive

❖ Host Name

Specify the host name.