OKI MC160n User Manual

Page of 268
114
Using the Copier
"
For details on positioning the document on the original glass, refer to 
“Placing a document on the original glass” on page 98.
4
To print color copies, press the Start-Color key. To print monochrome copies, 
press the Start-Mono key.
Scanning of the document begins.
"
In order to perform duplex (double-sided) copying or collated (Sort) 
copying with 2in1 copying, specify the necessary settings before per-
forming step 4. For details, refer to “Setting Duplex (Double-Sided) 
Copying” on page 118
 and “Setting Collated (Sort) Copying” on 
page 120.
5
When NEXT PAGE? appears in the message window, place the second doc-
ument page on the original glass, and then press the Enter key.
6
Repeat step 5 until all document pages have been scanned.
If 2in1 is set, printing automatically begins after two document pages (four 
document pages if duplex (double-sided) copying was set) have been 
scanned.
7
After all document pages have been scanned, press the Start-Color key or 
the Start-Mono key to begin printing the remaining pages.
Setting a Copy Function
ID card copying, repeat copying and poster copying can be set.
"
If a copy function other than NORMAL COPY has been set, 2in1 copying, 
collated (Sort) copying and duplex (double-sided) copying cannot be set. 
In addition, the zoom ratio is automatically set (and cannot be changed).
"
ID card copying, repeat copying and poster copying can only be per-
formed with the original glass. Position the document pages to be 
scanned so that they are aligned in the upper-left corner of the original 
glass. Since the image is printed 4 mm from the top and left side, adjust 
the position of the document as necessary. For details on positioning the 
document on the original glass, refer to “Placing a document on the origi-
nal glass” on page 98.