OKI MC160n User Manual

„ Dusty

„ Wet (or damp)

"

„ Layered 

„ Adhesive

„ Folded, creased, curled, embossed, warped, or wrinkled

„ Perforated, three-hole punched, or torn 

„ Too slick, too coarse, or too textured 

„ Different in texture (roughness) on the front and back

„ Too thin or too thick

„ Stuck together with static electricity

„ Composed of foil or gilt; too luminous

„ Heat sensitive or cannot withstand the fusing temperature (180°C [356°F])

„ Irregularly shaped (not rectangular or not cut at right angles)

„ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

„ Acidic 

Paper thicker than 90 g/m

2

 (24 lb bond) is referred to as thick stock. Test all thick 

stock to ensure acceptable performance and to ensure that the image does not 
shift.

You can print continuously with thick stock. However, this could affect the media 
feed, depending on the media quality and printing environment. If problems 
occur, stop the continuous printing and print one sheet at a time.

Up to 50 sheets, depending on their thick-
ness

Not supported

Orientation Face up

Thick Stock 1

Thick Stock 2

Thick Stock 1: 91 to 163 g/m

2

 (25 to 43.5 lb bond)

Thick Stock 2: 164 to 209 g/m

2

 (43.6 to 55.6 lb bond)

Not supported