Panasonic KX-FL541 User Manual

For Fax Advantage assistance, call 1-800-435-7329.

L

Keep the unit away from electrical noise 
generating devices, such as fluorescent 
lamps and motors.

L

The unit should be kept free from dust, high 
temperature and vibration.

L

The unit should not be exposed to direct 
sunlight.

L

Do not place heavy objects on top of this unit.

L

Do not touch the plug with wet hands.

L

Wipe the outer surface of the unit with a soft 
cloth. Do not use benzine, thinner, or any 
abrasive powder.

L

The printer of this unit utilizes a laser. Use of 
controls or adjustments or performance of 
procedures other than those specified herein 
may result in hazardous radiation exposure.

L

The fuser unit gets hot. Do not touch it.

L

During or immediately after printing, the area 
near the recording paper exit (

1) also gets 

warm. This is normal.

L

Be careful of the following when you handle 
the toner cartridge:
–

Do not leave the toner cartridge out of the 
protection bag for a long time. It will 
decrease the toner life.

–

If you ingest any toner, drink several 
glasses of water to dilute your stomach 
contents, and seek immediate medical 
treatment.

–

If any toner comes into contact with your 
eyes, flush them thoroughly with water, 
and seek medical treatment.

–

If any toner comes into contact with your 
skin, wash the area thoroughly with soap 
and water.

–

If you inhale any toner, move to an area 
with fresh air and consult local medical 
personnel.

L

Read the instructions on page 10 before you 
begin installation of the drum unit. After you 
have read them, open the drum unit 
protection bag. The drum unit contains a 
photosensitive drum. Exposing it to light may 
damage the drum. Once you have opened 
the protection bag:
–

Do not expose the drum unit to light for 
more than 5 minutes.

–

Do not touch or scratch the green drum 
surface.

–

Do not place the drum unit near dust or 
dirt, or in a high humidity area.

–

Do not expose the drum unit to direct 
sunlight.

L

In the printing process, heat is used to fuse 
toner onto the page. As a result, it is normal 
for the machine to produce an odor during 
and shortly after printing. Be sure to use this 
unit in an area with proper ventilation.

L

To extend the life of the drum unit, the unit 
should never be turned OFF immediately 
after printing. Leave the power turned ON for 
a minimum of 30 minutes after printing.

L

Store unused paper in the original packaging, 
in a cool and dry place. Not doing so may 
affect print quality.

L

Do not cover slots or openings on the unit. 
Inspect the air circulation vents regularly and 
remove any dust build-up with a vacuum 
cleaner (

2).

L

When replacing the toner cartridge or drum 
unit, do not allow dust, water, or liquids to 
come in contact with the drum. This may 
affect print quality.

Fuser unit

1

2

2

FL541.book  Page 4  Wednesday, August 27, 2003  7:07 PM