Panasonic DP-8020P User Manual

107

 Chapter 5    Internet Fax

„

Your machine has dual port capability allowing simultaneous G3 fax communication over a 
telephone line (PSTN) and LAN Communication.

„

In view of PC transmission, the standard setting of the resolution is set to “Fine”. If required, this 
setting can be changed to “Std” (see page 30).

„

• Your machine can receive text Email from a PC, and print ANSI characters. It will print a “„” 

symbol if an unrecognized character is received.

• Received Email font and character size are fixed, and cannot be changed.

• Text Email will be printed at about 72 lines per page. It is recommended that you use A4/Letter 

size recording paper.

• Documents cannot be transmitted correctly if the destination mail server does not support the 

MIME protocol. Erroneous mail may not be returned depending on the mail server.

„

When transmitting a document to an Email address, the following instructions are sent as text 
message in addition to the TIFF-F formatted image file.

Image data in the TIFF-F format has been attached to this Email. You can download the TIFF-F 
Image Viewer from the following URL addresses.

z

If the document(s) are sent in the PDF format, the following message is shown instead.
“Image data in PDF format has been attached to this email.”

„

To prevent unauthorized stations from getting access to your relay station for Internet Relayed 
transmission, you must set up your network security. Enter the relay station name, which is 
concealed from the final destinations, and a manager’s Email address for notification of all Internet 
Relayed transmissions.

„

PDF can be selected for file type attachment from “File Type and Name” in “Basic Menu”.

The PDF format can be chosen when sending scanned documents as an Email to a remote 
computer.

If a document is transmitted to an Internet Fax in the PDF format, the receiving Internet Fax station 
cannot print the attached file, resulting in an error.