Xerox FS 5250 User Manual
Programming - Non-IPDS
Xerox FS 5250, User’s Guide
Xerox FS 5250, User’s Guide
- 37 -
10. Programming the Xerox FS 5250
- Non-IPDS
- Non-IPDS
The Xerox FS 5250 works using a large number of internal Setup Functions
(FSL Functions)
(FSL Functions)
3
.
FSL setup functions can be sent either from your IBM system or from a PC.
When the protocol converter has been installed and connected to a printer,
you may have to consider the use of these setup options.
you may have to consider the use of these setup options.
The factory default setup will meet the demands of most host systems and
users, and special programming is therefore normally not required.
users, and special programming is therefore normally not required.
If, however, special circumstances require you to make changes to the pro-
gramming of the box, appendix A: ”Quick Reference Guide of the Supported
FSL Functions” lists all the functions supported in XES and PCL mode. This
list only describes the functions by their syntax and parameters, though. In
the Programmer's Guide, doc. no. D62081, you will find an extensive
description of the FSL Functions with notes, comments and examples.
gramming of the box, appendix A: ”Quick Reference Guide of the Supported
FSL Functions” lists all the functions supported in XES and PCL mode. This
list only describes the functions by their syntax and parameters, though. In
the Programmer's Guide, doc. no. D62081, you will find an extensive
description of the FSL Functions with notes, comments and examples.
3.
FSL = Function Selection via the Line