Xerox FS 5250 User Manual

In this chapter, only the most basic functions are described, such as paper
size, paper tray and font selection.

Appendix A: Quick Reference Guide to the FSL functions lists all the
supported FSL functions with syntax and parameter

For detailed information on the entire range of the supported FSL functions
with the Xerox FS 5250, you are referred to the Programmer's Guide, doc.
no. D62081.

Almost any printer will provide you with the facility of selecting various paper
sizes, but there are different ways of changing paper size  in the printer. In
some cases you can use the application software to change it, you can send
printer commands directly to the printer, or you can send commands to the
interface from the system. This chapter only describes the procedure for
changing paper through the interface.

If your printer has several paper trays with different paper sizes, remember
to select the corresponding paper tray, when you change the paper size.

If your printer only has one paper tray with one paper size, you can perhaps
buy additional paper trays for other paper sizes and change trays manually.

You can change paper size by sending commands to the interface from the
system.

The FSL function is primarily designed to inform the interface about the
installed paper sizes during installation.