Xerox 7232 User Manual
16 Security
168
Xerox WorkCentre 7232/7242 System Administration Guide
Specifying the Certificate
1.
On the [Properties] page, expand the [Security] folder.
2.
Click [Certificate Management].
3.
Set [Category] to [Local Device], and [Certificate Purpose] to [S/MIME].
4.
Click [Display the list].
5.
Select the certificate from the list.
6.
Click [Certificate Details], and then click [Use this Certificate].
NOTE: If the certificate does not contain the e-mail address of the machine, the error
message ”Your request was not processed” will appear. Import and select a certificate
that the e-mail address of the machine is written in.
message ”Your request was not processed” will appear. Import and select a certificate
that the e-mail address of the machine is written in.
7.
Click [Reboot Machine].
Enabling S/MIME Communication
1.
On the [Properties] page, expand the [Security] folder.
2.
Click [SSL/TLS Settings].
3.
Under [S/MIME Communication], select the [Enabled] check box.
4.
Click [Apply].
5.
You will be prompted to reboot the machine. Click [Reboot Machine] to reflect the
settings.
settings.
Configuring the S/MIME Settings
1.
On the [Properties] page, expand the [Security] folder.
2.
Click [S/MIME Settings].
3.
Set [Message Digest Algorithm], [Message Encryption Method], [Certificate Auto
Store], [Receive Untrusted E-mail], and [Digital Signature - Outgoing E-mail].
Store], [Receive Untrusted E-mail], and [Digital Signature - Outgoing E-mail].
4.
Click [Apply].
Configuration of a Computer
The following describes how to configure a computer.
To send scanned data from the machine to a computer by S/MIME-encrypted e-mail
The personal certificate (including the root certificate) for the destination e-mail address
needs to be registered in the machine.
needs to be registered in the machine.
NOTE: For information on how to import a certificate, refer to the CentreWare Internet
Services online help.
Services online help.