Xerox 7232 User Manual

This chapter explains how to set up the machine to operate in a UNIX TCP/IP 
environment. The UNIX Workstation Operating Systems (OS) supported are Solaris, 
SunOS, and HP-UX. The following information is provided.

Information Checklist – page 83
UNIX TCP/IP Environments – page 84
UNIX TCP/IP Installation – page 84
Installation Procedure – page 84
Network Communication Setup – page 85
Workstation Setup – page 86
Test Print – page 92
Printing – page 92
Solaris/HP-UX – page 92
SunOS – page 94
Printer Status – page 96
Solaris/HP-UX – page 96
SunOS – page 97
-C Option – page 98

Before installing the UNIX TCP/IP features on the machine, make sure that the 
following items are available or have been performed.

An existing operational network utilizing a UNIX TCP/IP protocol is 
required. These steps are not designed to install the UNIX TCP/IP 
network.

Customer

SunOS 4.1x, Solaris 1.x, 2.x, 7.x, 8.x, 9.x, 10.x, HP-UX 9.x, 10.x, 11.x

Customer

Make sure that the correct IP Address is being used for the machine.

Customer

Make sure that the Gateway Address is set correctly.

Customer

Make sure that the Subnet Mask (for IPv4) or Prefix (for IPv6) is set 
correctly.

Customer

Make sure that the Host Name is set correctly.

Customer

Test the copy and fax features of the machine, to make sure that they are 
installed fully and functioning correctly.

Customer