Xerox 7428 User Manual
Scan to PC (FTP/SMB)
WorkCentre 7425/7428/7435
System Administrator Guide
125
15. Select User Name and provide the User account name assigned to the directory on the receiving
computer.
16. Select Password and provide the password to access the User account on the receiving computer.
17. Select Port Number to set the communications port number. Standard Port is recommended.
18. When done changing and saving settings, touch Close (repeatedly, if necessary) to exit to the
17. Select Port Number to set the communications port number. Standard Port is recommended.
18. When done changing and saving settings, touch Close (repeatedly, if necessary) to exit to the
Tools screen.
19. Wait several seconds for the Auto Clear service to log you out.
Using the Scan to PC (FTP/SMB) Feature
After the appropriate ports have been enabled, TCP/IP has been configured, and the receiving
computers address added to the Address Book, the Scan to PC (FTP/SMB) feature can be used as
follows.
1. Select Scan to PC from the Services screen.
2. Touch Transfer Protocol, select a protocol, and touch Save.
3. Note that you can touch the blank lines on the screen and manually enter Server settings, or touch
computers address added to the Address Book, the Scan to PC (FTP/SMB) feature can be used as
follows.
1. Select Scan to PC from the Services screen.
2. Touch Transfer Protocol, select a protocol, and touch Save.
3. Note that you can touch the blank lines on the screen and manually enter Server settings, or touch
Address Book. For SMB you can also browse the Microsoft Network.
4. Select the Receiving Computer (computer or server) in the list contained in the Address Book and
touch Save.
5. Place your document in the document feeder and press the control panel’s large, green Start
button. Progress of the data transfer will be displayed on screen.