Xerox 7428 User Manual
Installation
WorkCentre 7425/7428/7435
System Administrator Guide
System Administrator Guide
18
Configure the Print Driver
1. On the Windows XP desktop, from Start, select Printers and Faxes. The Vista path is Start\Control
1. On the Windows XP desktop, from Start, select Printers and Faxes. The Vista path is Start\Control
Panel\Printer(s).
2. Right click the printer's icon and select Properties. Use the available tabs to set the printer's job
processing defaults, including enabling Bi-Directional Communication. Additional settings may be
accessed by clicking the Printing Preferences button on the General tab.
accessed by clicking the Printing Preferences button on the General tab.
EtherTalk (AppleTalk) Peer to Peer Printing
Before You Start
1. Obtain the print driver for your computer's operating system. See
1. Obtain the print driver for your computer's operating system. See
2. Print a Configuration Report. See
3. On the Configuration Report, under the EtherTalk data label, verify that the EtherTalk port is
enabled, and that the printer has been assigned an EtherTalk (Printer) Name and an EtherTalk
zone. If one or more of these parameters needs to be configured, see
zone. If one or more of these parameters needs to be configured, see
Installation Instructions for Macintosh OS X 10.3 and Newer
1. Double click to open the folder containing the drivers.
2. Double click to open the machine model.dmg.
3. Double click to open the machine model.pkg file.
4. When the Welcome screen displays, click Continue.
5. Click Continue, then Agree or Accept to accept the License Agreement.
6. Select the required disk (if necessary) where you want to install the printer. Click Continue.
7. Click Install.
8. Click Close, and restart the computer.
9. When the computer has restarted, double click the hard drive icon.
10. Double click the Applications icon.
11. Double click the Utilities folder.
12. Double click Print Center icon.
13. Double click Add to add a new printer.
14. Select AppleTalk as your network protocol.
15. Select the required AppleTalk zone.
16. Select the printer that you wish to set up.
17. Select the Printer Model (that is, choose the PPD for your printer).
18. Click Add.
19. Print a document from an application to verify that the printer is installed correctly.
2. Double click to open the machine model.dmg.
3. Double click to open the machine model.pkg file.
4. When the Welcome screen displays, click Continue.
5. Click Continue, then Agree or Accept to accept the License Agreement.
6. Select the required disk (if necessary) where you want to install the printer. Click Continue.
7. Click Install.
8. Click Close, and restart the computer.
9. When the computer has restarted, double click the hard drive icon.
10. Double click the Applications icon.
11. Double click the Utilities folder.
12. Double click Print Center icon.
13. Double click Add to add a new printer.
14. Select AppleTalk as your network protocol.
15. Select the required AppleTalk zone.
16. Select the printer that you wish to set up.
17. Select the Printer Model (that is, choose the PPD for your printer).
18. Click Add.
19. Print a document from an application to verify that the printer is installed correctly.