Xerox 7428 User Manual
Network Management
WorkCentre 7425/7428/7435
System Administrator Guide
System Administrator Guide
50
IP Filtering (IP Address Restriction)
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.
4. Click the Properties Tab.
5. Click the Security folder.
6. Select IP Filtering.
7. In either the IPv4 area or the IPv6 area, complete the following steps.
3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.
4. Click the Properties Tab.
5. Click the Security folder.
6. Select IP Filtering.
7. In either the IPv4 area or the IPv6 area, complete the following steps.
Note:
IPv4 is the traditional (xxx.xxx.xxx.xxx) address space used with TCP/IP networks.
a. To allow universal, unrestricted access to the printer, clear the Enabled check box.
b. To restrict access to specific IP Addresses and Subnet Masks:
•
b. To restrict access to specific IP Addresses and Subnet Masks:
•
Click the Enabled check box.
•
Click Add or Edit to add or edit an IP address from which you intend to accept jobs. Click Apply.
Note:
IP filtering will not work until at least one IP address has been added. This prevents turning off
ALL access to the printer.
•
Click Delete to delete an IP address. Click Apply.
8. Click Apply when done.
9. Send a test job.
9. Send a test job.