Xerox 7428 User Manual
Security
WorkCentre 7425/7428/7435
System Administrator Guide
System Administrator Guide
84
Scheduled Image Overwrite
A TCP/IP network-connected device can be set to overwrite image data on a scheduled basis.
The Image Overwrite will delete all image data from the hard disk.
To enable a scheduled image overwrite, perform the following steps:
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Click the Security folder.
4. Click Scheduled Image Overwrite.
5. Click the Scheduled Image Overwrite Enabled check box.
6. Configure the Frequency, Day, Week, Hour, and Minute settings.
3. Click the Security folder.
4. Click Scheduled Image Overwrite.
5. Click the Scheduled Image Overwrite Enabled check box.
6. Configure the Frequency, Day, Week, Hour, and Minute settings.
Note:
The printer will be taken off-line each day at the specified time to perform the overwrite.
7. Click Apply.
8. Click OK to confirm.
9. If prompted, enter the system administrator user name and password (default: admin, 1111).
8. Click OK to confirm.
9. If prompted, enter the system administrator user name and password (default: admin, 1111).