Xerox 701P42722_EN User Manual

The user name or group 
name of the job is not defined 
in the print server.

Use NWADMIN or 
PCONSOLE to check 
whether the user name or 
group name of the job is 
registered in the target print 
server.*

<Action -1>
Re-send the print job to a 
print queue in which the user 
name or group name has 
been registered correctly.*

<Action -2>
Use NWADMIN or 
PCONSOLE to register the 
user name or group name of 
the job in the print server.*

The print job is in a print 
queue that is not assigned to 
the machine.

Use NWADMIN or 
PCONSOLE to check 
whether the machine is 
assigned to the print queue.

<Action -1>
Re-send the print job to the 
print queue assigned to the 
machine.*

<Action -2>
Use NWADMIN or 
PCONSOLE to assign the 
target queue to the machine.*

The number of print queues 
assigned exceeds the 
maximum number that the 
machine can support.

Use NWADMIN or 
PCONSOLE to check 
whether the required print 
queue is assigned to the 
machine.*

Re-send the print job to the 
print queue assigned to the 
machine.*

No slave file server is 
specified (bindery mode).

Use PCONSOLE to check 
whether a slave file server is 
registered.*

Use PCONSOLE to register a 
slave file server.*

Incorrect printer type.

Use PCONSOLE to check 
the printer type.*

Use PCONSOLE to specify 
[Remote Parallel, LPT1]. 
Then reboot the machine.*

The setting for the slave file 
server is incorrect (bindery 
mode).

Use PCONSOLE to check 
the setting.*

Use PCONSOLE to specify 
the correct setting.*

The actual number of the 
page of the print job is 
different from the page 
number set in the machine.

Use NWADMIN or 
PCONSOLE to check 
whether the starting paper 
number is the same as that of 
the print job.*

<Action -1>
Use NWADMIN or 
PCONSOLE to match the 
[Starting paper] number with 
the paper number of the print 
job.*

<Action -2>
Use PCONSOLE to stop the 
print job. When the paper 
number is invalid, change the 
number, then re-send the 
print job to the print queue.