Xerox 701P42722_EN User Manual

NOTE: For some print languages, the color parameter may be invalid.

NOTE: The system default is used if no parameter is specified.

The following parameters can be specified for stapling.

NOTE: The stapling setting is not available on the machine.

NOTE: If several parameters are specified in the first lpr command, data may not print.

NOTE: For some print languages, the stapling parameter may be invalid.

To specify the output format of printing, enter the following command:

-C,[parameter],[parameter]

Enter a “,” (comma) after -C followed by the parameters which specify the output 
format. To specify multiple parameters, separate them with “,”.

For example, to print a file named “file1”, two-sided on A4 (210 × 297mm/8.3 × 
11.7inches) on printer fxPS, enter the following command:

%lpr -PfxPS -C,DUP,A4 file1

NOTE: If the parameter string of the -C option exceeds 64 characters, the operation 
may not function correctly.

STAPLETL

Places one staple in the upper left corner of the prints.

STAPLETD

Places two staples at the top of the prints.

STAPLETR

Places one staple in the upper right corner of the prints.

STAPLELD

Places two staples on the left side of the prints.

STAPLERD

Places two staples on the right side of the prints.

STAPLEBL

Places one staple in the lower left corner of the prints.

STAPLEBD

Places two staples at the bottom of the prints.

STAPLEBR

Places one staple in the lower right corner of the prints.